How To Clear Hard Water Off Of Ceramic Bowl

Hard water contains many minerals, including calcium and magnesium ions, which could easily result in stubborn scales on the surface of a ceramic bowl or other household goods. These white or gray deposits will not only affect the appearance of the ceramic bowls but possibly their service life too. This article will introduce a number of effective ways to remove hard water marks from ceramic bowls and help you easily restore cleanliness and gloss to ceramic utensils.

Why does the ceramic bowl have hard water marks

Hard water contains so many minerals, mainly calcium and magnesium, at high concentrations. As the water evaporates from the hard water, it deposits those minerals on the surface of an object, which becomes a scale. The smooth glaze used in ceramic bowls is more prone to mineral deposits, especially when it is exposed to water or not wiped dry in time.

Hard water marks give not only an ugly look to the bowls made of ceramics but cleaning for a long time may give a rough surface or leave blemishes that are difficult to remove.

Methods to remove hard water marks from ceramic bowls

Using white vinegar

Among the most common natural cleaners in this regard is white vinegar, applied to clean the hard water spots. It happens to be rich in acidity; hence, perfect for dissolving mineral deposits. This would brighten back the surface shine of your ceramic bowls.
Instructions:

White vinegar and water in a ratio of 1:1; stir well in the container. Put the bowl into it, soaking. Soak it for 30 minutes to 1 hour. If there is more serious scale formation, it could be extended appropriately. After softening the hard water mark, gently wipe it off with a soft cloth or sponge on the surface.
Mop the bowl with clean water and then dry it with a clean towel.

Baking soda and vinegar mixture

The mixture of baking soda and vinegar can create an intensive cleaning effect, which is very appropriate for the obstinate scale.
Procedure:

Spread a layer of baking soda powder onto the surface of the ceramic bowl.
Spray a small amount of white vinegar onto the baking soda to the point where it starts to foam.
Wipe the surface gently with a soft brush or sponge after standing for 10 minutes. Then, rinse and wipe with a dry cloth. 2.3 Application of Lemon Juice Lemon juice contains natural citric acid, which has a good dissolving effect on hard water marks and brings a fresh fragrance. Process: Squeeze fresh lemon juice or use pure lemon juice directly. Apply lemon juice evenly to the hard water marks on the ceramic bowl.
Let it sit for 10-15 minutes, then wipe the surface with a soft dry cloth.
Rinse and let dry.

Commercial hard water removers

There are a lot of professional cleaners for hard water marks in the market. These will mostly contain some highly effective acid ingredients that help to quickly dissolve the scale.
Passos:

Operate as instructed in the product and put cleaner onto hard water marks.
Leave it on for some time, then wipe with a soft cloth or sponge.
Rinse and ensure that there is no cleaner left behind.

Precautions

Do not use metal brushes or other hard-cleaning accessories
Metal brushes or other hard cleaning items can scratch the surface of the ceramic bowl and make it lose its smooth glaze. Soft cloths, sponges, or soft brushes are recommended to clean.
Clean up watermarks in time: the watermark should be cleaned up and wiped dry in time to avoid the formation of hard water marks.
Test the compatibility of the cleaning agent: test in an inconspicuous place before using commercial cleaning agents or strongly acidic water to ensure that the glaze is not damaged.
Wear gloves
Some of these cleaning agents or acid solutions might burn the skin. So, it is better wearing gloves to save your hands from such harsh conditions while cleaning the surfaces.

How to avoid Hard water spots

Use softened water
Water conditioner setup can reduce the concentration of hard water minerals. That, in turn, reduces the scaling or mineral deposit right from its source.
Limpar regularmente
Check and clean the ceramic bowl regularly to avoid hard water marks appearing.
Dry It
The ceramic bowl should be dried with a clean cloth after cleaning so that when the water gets evaporated, it may not precipitate the minerals.

Conclusão

The process of hard water stains removal from a ceramic bowl is not complex. The brilliant shine of your ceramic utensils can easily be returned with very common white vinegar, baking soda, or lemon juice available in your homes. Professional cleaning agents may be effective for some stubborn scales. While cleaning, pay great attention to the protection of the ceramic surface, avoiding rough cleaning tools. In that process, it effectively reduces the formation of hard water marks through reasonable daily maintenance and prevention so that your ceramic bowls can always be clean and new.

Besides cleaning and maintenance, high-quality ceramic product choice is another very important way to reduce hard water marks’ trouble. Cerâmica Yicheng is a professional ceramic brand well known for exquisite craftsmanship and first-class materials. Its ceramic bowl has a smooth, delicate glaze that makes cleaning very easy and the surface of this kind of bowl also enjoys high stain resistance and good durability.

If you are in search of either ceramic bowls or other types of ceramic products that are both beautiful and practical, Cerâmica Yicheng is your trustworthy choice. Welcome to our official website to explore more fine ceramics and add a touch of refinement and warmth to your life!